
Construction Loans for a Custom Home in the Bay Area: Jumbo Limits, Draws and Lien Releases

Last updated: November 2026
Short answer: Most Bay Area custom homes are financed with a construction loan that pays the builder in draws as work is completed, then converts or refinances into a permanent mortgage. Because the 2026 conforming loan limit is $832,750 nationally and tops out at $1,249,125 in the highest-cost areas, nearly every custom home loan here is a jumbo loan. Lenders will want a priced contract, full plans, a licensed builder and a lien release with every draw.
Financing a custom home is different from buying a finished house. The lender is funding something that does not exist yet, so it controls money in stages and checks the work before each payment. This guide explains how that works and how to set your project up so the money and the schedule move together.
How does a construction loan for a custom home work?
A construction loan funds the build in stages rather than all at once. The lender releases money in draws tied to completed work, usually after an inspection, and the borrower typically pays interest only on the amount drawn so far. When the house is finished, the loan converts to, or is refinanced into, a permanent mortgage.
Fannie Mae describes two structures. In a single-closing transaction, the construction loan and permanent financing are underwritten and closed together with one set of documents, the borrower can lock the permanent rate at that closing, and the lender manages disbursements to the builder and suppliers. In a two-closing transaction, an existing construction loan from any lender is later rolled into a permanent mortgage, with a second closing. [Source: Fannie Mae]
| Structure | Closings | Rate lock | Best fit |
|---|---|---|---|
| Single-closing | One | Permanent rate can be locked at closing | Owners who want certainty on the long-term rate |
| Two-closing | Two | Permanent rate set at the second closing | Owners who want to shop construction terms separately |
Source: Fannie Mae, Construction-to-Permanent Financing.
Is a Bay Area custom home loan a jumbo loan?
Almost always. The Federal Housing Finance Agency set the 2026 conforming loan limit for one-unit properties at $832,750, with a ceiling of $1,249,125, which is 150 percent of the baseline, in the highest-cost areas. [Source: FHFA 2025] Check your county's exact figure on FHFA's map before you talk to lenders.
Bay Area custom homes usually exceed that ceiling on construction alone. Our 2026 Bay Area custom home cost guide puts upscale construction at $500 to $750 per square foot, so a 4,000-square-foot home runs $2 million to $3 million before land and soft costs. Jumbo construction lending is offered by banks and private lenders on their own terms, so down payment, reserves and rate structure vary more than they do on conforming loans.
What does a lender need before it funds a custom home?
Lenders underwrite the project as well as the borrower. Expect to provide a signed construction contract with a line-item budget, complete plans and specifications, a draw schedule, proof of land ownership or the land purchase, and details on the builder's license and insurance. The appraiser values the home as completed from the plans, so the plans and budget need to be finished, not conceptual.
A contractor's license is easy to confirm with the Contractors State License Board, which also publishes the statutory lien release forms lenders rely on at each draw. [Source: CSLB] A design-build team can supply the plans, budget and schedule as one package, which shortens underwriting because the lender is not reconciling an architect's drawings with a separate contractor's bid.
How do draws and lien releases work during construction?
Each draw follows the same loop: the builder requests payment for completed work, the lender's inspector confirms progress, and funds are released, usually against lien releases. California's lien releases must substantially follow one of four statutory forms in Civil Code sections 8132, 8134, 8136 and 8138, covering conditional and unconditional releases for progress and final payments. [Source: CSLB]
The Board also warns that paying the general contractor does not guarantee that subcontractors and suppliers are paid, which is why lenders often collect releases from major trades too. Our guide to mechanics liens and lien releases on a custom home walks through the forms and deadlines.
| Draw stage (typical) | What the inspector looks for |
|---|---|
| Site work and foundation | Grading, utilities, foundation poured |
| Framing | Structure, roof sheathing, windows set |
| Rough-in | Plumbing, electrical, mechanical inspected |
| Interiors | Insulation, drywall, cabinetry, finishes |
| Completion | Final inspection, certificate of occupancy |
Stages vary by lender and contract. Shown as a common pattern, not a lender requirement.
How do you keep a custom home loan on budget?
Most loan problems trace back to changes and delays. A construction loan funds a fixed budget, and owner-driven changes that are not in it must be paid out of pocket or approved by the lender. Building a contingency into the budget, settling finishes before the loan closes, and keeping the schedule tight all protect the loan.
Interest carry is the hidden cost of delay. Because interest accrues on drawn funds, a permit or design-review delay before construction is cheap, but a stall mid-build is expensive. Front-loading design review, as our custom home timeline guide describes, keeps the loan period short. An owner's representative can also review draw requests on large projects.
Rate risk is the other variable. In a single-closing loan, Fannie Mae notes that the borrower can lock the permanent rate at closing, and if rates drop during construction, can receive the lower rate at conversion. [Source: Fannie Mae] Ask any jumbo lender whether its product offers the same protection, since jumbo terms are set by each lender.
How Craftsmen's Guild works with construction lenders
Craftsmen's Guild is a family-owned design-build firm founded in 1988, with architects, designers and builders on one team. For financed projects, we deliver the plans, line-item budget, draw schedule and lien releases that lenders ask for, and we price the house while it is being designed, so the budget the lender underwrites is one we can build to.
We build across the Peninsula and South Bay, including Los Altos, Palo Alto and Atherton. See our custom home construction process and our overview of custom home builders in the Bay Area. If you are weighing a teardown, our teardown checklist covers what to verify first.
Frequently asked questions
Can I use a construction loan to buy the land too?
Often, yes. Many construction loans can include the lot purchase, or credit equity in land you already own toward the down payment. Terms vary by lender, so confirm how your lender treats the land before you sign a purchase contract.
What is the 2026 conforming loan limit in the Bay Area?
FHFA set the 2026 baseline at $832,750 for one-unit properties, with a high-cost ceiling of $1,249,125. Check FHFA's county map for your exact limit. Most Bay Area custom homes exceed it and are financed with jumbo loans.
Do I pay the full mortgage payment during construction?
Usually not. Construction loans typically charge interest only on the money drawn so far, so payments start small and grow as the build progresses. Full principal-and-interest payments begin when the loan converts to permanent financing.
What is a single-close construction loan?
It is a loan where the construction phase and the permanent mortgage close together with one set of documents. Fannie Mae notes the borrower can lock the permanent rate at that closing, and the lender manages disbursements during construction.
Planning the financing for your custom home
A custom home loan works best when the plans, budget and schedule are complete before closing, and when every draw is matched to verified work and signed lien releases. Owners who line up a jumbo construction lender early, and build the budget with real contingency, keep both the house and the loan on track. When you are ready, book a complimentary consultation and we will help you prepare the package your lender needs.
What We Build
- Custom Home ConstructionGround-up homes across the Peninsula and South Bay
- Home Remodeling & RenovationsWhole-house remodels, kitchens and baths
- ADUs: Accessory Dwelling UnitsDetached and attached secondary units
- Owner's RepresentativeWe manage the build on your behalf
Where We Build
All service areas
Ready to turn your vision into a stunning living space?
Schedule a complimentary consultation. We’ll listen, walk your space, and map a path forward.


