
The 2025 California Energy Code for New Homes: Heat Pumps, Solar, Batteries and Ducts

Last updated: November 2026
Short answer: The 2025 California Energy Code applies to new homes whose building permit applications were submitted on or after January 1, 2026. For a new single-family home, heat pumps are now the prescriptive baseline for space heating in every climate zone, the prescriptive gas water heating exception is gone, ducts must sit entirely inside conditioned space, and homes with electrical service over 125 amps must be battery-ready unless a battery is installed. Gas is still possible, but only through the performance path.
For anyone planning a custom home in the Bay Area, the code shapes mechanical design, roof layout and the electrical service from the start. Here is what changed, what it means on a real project, and where local rules go further.
When does the 2025 Energy Code apply to a new home?
It applies to building permit applications submitted on or after January 1, 2026, and those applications must use the 2025 compliance software and documents. [Source: California Energy Commission 2025] A home permitted under the 2022 code before that date stays under the 2022 rules, which matters if you are buying a lot with plans already in process.
The Energy Commission estimates the 2025 standards will save more than $4.8 billion in statewide energy costs over 30 years. [Source: California Energy Commission 2024] For a homeowner, the practical effect is a house designed around heat pumps, solar and a larger electrical service from day one.
Do new California homes have to use heat pumps?
On the prescriptive path, yes. Heat pumps are the prescriptive baseline for space heating in every climate zone, and gas space heating is allowed only when the home complies through the performance approach. The prescriptive exception that allowed gas water heating has also been removed, again leaving gas available only through performance modeling. [Source: California Energy Commission 2025]
The performance path lets a design trade one feature against another, so a home can keep a gas furnace or water heater if the rest of the envelope and systems make up the difference in modeled energy use. On a custom home, that modeling is part of design, not a box checked at permit. If you install gas water heating anyway, the code still requires a 30-amp branch circuit so a heat pump water heater can be added later.
| System | Prescriptive path (2025) | Performance path |
|---|---|---|
| Space heating | Heat pump baseline, every climate zone | Gas allowed if modeled to comply |
| Water heating | Gas exception removed | Gas allowed if modeled to comply |
| Gas water heater installed | 30A heat pump water heater circuit required | Same |
Source: California Energy Commission, 2025 Energy Code Overview.
What are the solar and battery rules for new homes?
Solar sizing now follows the roof. The prescriptive PV size is based on solar access roof area, at 18 watts per square foot for steep-sloped roofs and 14 watts per square foot for low-sloped roofs. Newly built single-family homes with electrical service over 125 amps must also be battery-storage ready, unless a battery is installed. [Source: California Energy Commission 2025]
Almost every custom home in the Bay Area runs a service well above 125 amps, so battery readiness should be assumed. That means planning panel space, conduit and a wall location for a future battery during design. Roof geometry matters too: a complex roof with little unshaded area changes the solar calculation, which is one reason we settle roof planes early. Our guide to sustainable custom homes in the Bay Area covers the design choices around solar and storage.
What changed for ducts and ventilation?
Duct systems and air handlers must now be entirely in conditioned space and verified by an ECC rater, and ducts must sit below the ceiling unless the attic is built as a high-performance attic under the code's Option B. Balanced and supply-only ventilation systems, including heat and energy recovery ventilators, must have accessible air filters. [Source: California Energy Commission 2025]
This is a framing and ceiling-height question as much as a mechanical one. Keeping ducts inside the conditioned envelope means dropped soffits, chases or a sealed attic, all of which affect ceiling heights and, in some towns, how floor area is counted. Coordinating mechanical routes before framing avoids losing ceiling height where it matters most.
Do Bay Area towns require more than the state code?
Some do. Local rules can go beyond the statewide minimum, so the town matters. Portola Valley, for example, requires new single-family homes to be all-electric, with solar PV, a heat pump, and battery-ready, EV-ready and greywater-ready infrastructure. [Source: Town of Portola Valley 2023] In a town like that, the performance path cannot be used to keep gas.
Local rules change often, so we confirm the current requirement with each building department during feasibility. Our town guides cover the local layer in detail, including Woodside, Menlo Park and Los Altos Hills. Hillside lots in fire zones add wildland-urban interface requirements on top of the energy code, covered in our wildfire-resistant home guide.
What does the 2025 code mean for your budget?
It shifts money rather than simply adding it. A heat pump system replaces a furnace and air conditioner, and induction replaces a gas range, but the electrical service, panel capacity and battery readiness usually grow. The Energy Commission projects the standards' savings at more than $4.8 billion statewide over 30 years [Source: California Energy Commission 2024], so the code is designed to pay back through lower operating costs.
On a custom home, the cleanest approach is to design all-electric from the start and size the service for a battery and EV charging even if you add them later. Our 2026 Bay Area custom home cost guide breaks down where systems sit in the overall budget, and our timeline guide shows where energy compliance falls in the permit schedule.
How Craftsmen's Guild designs to the 2025 code
Craftsmen's Guild is a family-owned design-build firm founded in 1988, with architects, designers and builders on one team. Because the same team designs and builds the house, energy modeling, roof planes, duct routes and the electrical service are decided together during design, instead of being retrofitted after plan check.
We build custom homes across the Peninsula and South Bay. See our custom home construction process, our overview of custom home builders in the Bay Area, and our completed projects.
Frequently asked questions
Can I still have a gas stove in a new California home?
Under the statewide 2025 code, the energy rules focus on space and water heating, and gas for those systems is allowed through the performance path. Some towns go further and require all-electric construction, which rules out gas ranges. Check your town's current rules before you choose appliances.
Do new homes need a battery in California?
Not necessarily installed, but most must be ready for one. New single-family homes with electrical service over 125 amps must be battery-storage ready unless a battery is installed. In practice, that covers nearly every custom home in the Bay Area.
Which code applies if my plans were started in 2025?
The trigger is the permit application date. Applications submitted on or after January 1, 2026 fall under the 2025 Energy Code. A project that applied before that date is reviewed under the 2022 code.
Do ducts have to be inside the house now?
Yes. Duct systems and air handlers must be entirely in conditioned space and verified by an ECC rater, and ducts must sit below the ceiling unless the attic is designed as a high-performance attic. Plan duct routes before framing to protect ceiling heights.
Planning a new home under the 2025 code
The 2025 Energy Code makes heat pumps, larger electrical service and battery readiness the default for new California homes, with gas available only through modeling and sometimes not at all. Owners who design around those rules from the first sketch avoid redesign at plan check. When you are ready, book a complimentary consultation and we will walk through your lot and goals.
What We Build
- Custom Home ConstructionGround-up homes across the Peninsula and South Bay
- Home Remodeling & RenovationsWhole-house remodels, kitchens and baths
- ADUs: Accessory Dwelling UnitsDetached and attached secondary units
- Owner's RepresentativeWe manage the build on your behalf
Where We Build
All service areas
Ready to turn your vision into a stunning living space?
Schedule a complimentary consultation. We’ll listen, walk your space, and map a path forward.


